Lotus Europa Federal S2 Brake Lines – Modified for Wilwood Hanging Pedal Assembly.

Brake Switch location is on the side of the chassis vs top. See Picture 3 below.

		Termination Point A				Termination Point B
Qty	Description	Size		Flare Type	Length	Size		Flare Type
1	Steel Brake Line	3/8"-24	Male	Bubble Flare	18"	3/8"-24	Female	Double Inv - OP.2
1	Steel Brake Line	3/8"-24	Male	Bubble Flare	10"	3/8"-24	Female	Double Inv - OP.2
2	Steel Brake Line	3/8"-24	Male	Bubble Flare	33"	3/8"-24	Female	Double Inv - OP.2
1	Steel Brake Line	3/8"-24	Male	Bubble Flare	47"	3/8"-24	Female	Double Inv - OP.2
1	Steel Brake Line	3/8"-24	Male	Bubble Flare	9"	3/8"-24	Female	Double Inv - OP.2
1	Steel Brake Line	3/8"-24	Male	Bubble Flare	82"	3/8"-24	Male	Bubble Flare
2	SS Braided Lines	3/8"-24	Male	Bubble Flare	12"	3/8"-24	Male	Bubble Flare
2	SS Braided Lines	3/8"-24	Male	Bubble Flare	15"	3/8"-24	Male	Bubble Flare
8	Jam Nuts	3/8"-24

Picture 1. Male End

Picture 2. Female with Nut

Picture 3. Typical hose to line connection with out separate bulkhead fitting. Note long male ends.

Note: 82” brake line is 3” shorter than stock due to Wilwood hanging pedal assy.

Doubt if these SS lines will be long enough to reach Wilwood Dynalite front calipers. Likely will be replaced with longer lines with 90 degree fittings. (in process)